Machete
MACHETE FIGHT 250.4 | 250 Watt 4-channel amplifier
Free shipping over $199 · Financing with Snap & Acima · Full manufacturer warranty
DESCRIPTION▼
Meet the Fight 250.4 — the golden middle of the Fight series four-channel lineup, delivering the perfect balance of power, refinement, and size. Stable down to 2 Ohm per channel, it drives your full front stage with clean, confident power — and when it's time to bring in the bass, bridged mode turns it into a true sub driver pushing 2 x 660W into 4 Ohm.
Flexibility is where the Fight 250.4 shines. With fully adjustable High Pass and Low Pass filters that can work simultaneously, you get real bandpass capability on board — perfect for dialing in midbass drivers or building active multi-way systems without external processors. Add an impressive 94 dB signal-to-noise ratio, and every note comes through clean, detailed, and free of unwanted hiss.
Compact enough to hide under a seat, tough enough to run all day — the Fight 250.4 is the sweet spot for anyone serious about sound quality.
SPECIFICATIONS▼
| Power RMS (4 Ohm, 14.4V) | 250 W x 4 |
| Power RMS (2 Ohm, 14.4V) | 350 W x 4 |
| Power RMS (4 Ohm Bridged Mode, 14.4V) | 660 W x 2 |
| High Pass Filter | 50 - 12 000 Hz |
| Low Pass Filter | 50 - 12 000 Hz |
| Crossover | 12 dB/Oct |
| Frequency Response | 10 - 20 000 Hz |
| Input Sensitivity | 0.3 - 8 V |
| Signal-to-Noise Ratio | 94 dB |
| Damping Factor | 45 |
| Integrated Fuse | No |
| Input Terminal Connection | 4 AWG / 21.2 mm² |
| Output Terminal Connection | 10 AWG / 5.3 mm² |
| Working Voltage | 9 - 16.5 V |
| Simultaneous Operation of LPF and HPF | Yes |
| Minimum Load Impedance (Single Channel) | 2 Ohm |
| Minimum Load Impedance (Bridged Mode) | 4 Ohm |
| Size (L x W x H) | 273 x 155 x 53 mm / 10.75 x 6.1 x 2.09 in |
MANUAL▼
Goes well with this
