Avatar
Avatar Doomsday 67 | 6.5" Mid-Range Speakers (Pair)
$179.90
In stock
Product details −
UNLEASH THE DOOMSDAY
6.5" MID-RANGE | 300W RMS | 101.60 dB
NEW
RMS POWER
300
WATTS RMS
MAX POWER
600
WATTS MAX
DESCRIPTION▼
Avatar Doomsday 67 is a 6.5-inch mid-range pair built to sit loud and clear above a sub stage. 300 W RMS and 600 W MAX run through a pressed-paper cone, a cloth surround, and a ferrite motor on a steel frame.
Sensitivity is 101.60 dB at 4 ohms, with response from 140 Hz to 11,000 Hz. The 1.75-inch copper-clad aluminum voice coil and 2.95-inch mounting depth keep the driver compact enough for a typical door or kick panel.
Sold as a pair. Cut-out is 6.08 inches. The spec sheet below is the full measured set: Fs 148 Hz, Qts 0.47, Vas 3.90 L.
SPECIFICATIONS▼
| Model | Doomsday 67 |
| Type | Midrange |
| Size | 6.5" |
| Frequency Response | 140–11,000 Hz |
| Package Quantity | Pair |
| Voice Coil Size | 1.75" |
| Cone Material | Pressed Paper |
| Magnet Material | Ferrite |
| Voice Coil Wire | Copper-Clad Aluminum |
| Surround Material | Cloth |
| RMS Power | 300 W |
| MAX Power | 600 W |
| Frame | Steel |
| Impedance | 4 Ohm |
| SPL | 101.60 dB |
| Fs | 148.00 Hz |
| Qts | 0.47 |
| BL | 8.48 |
| Vas | 3.90 L |
| Mounting Depth | 75.0 mm / 2.95" |
| Cut-Out Diameter | 154.5 mm / 6.08" |
| Gross Weight | 6.000 kg / 13.23 lb |
MANUAL▼
COMING SOON
WHAT MAKES IT LEGENDARY
EVERY DETAIL ENGINEERED FOR ABSOLUTE DOMINANCE

PRESSED PAPER CONE
Light paper cone voiced for the 140 Hz to 11 kHz mid-range band.
CLOTH SURROUND
Treated cloth surround around the 6.5-inch cone.
DUST CAP
Center cap over the 1.75-inch voice coil.
STEEL FRAME
Stamped steel basket with the mounting flange.

600W MAX
Magnet label states Doomsday 67 and 600 W MAX.
FERRITE MAGNET
Ferrite motor, the same material listed in the spec table.
STEEL BASKET
Open stamped-steel frame behind the cone.
PUSH TERMINALS
Spring terminals on the 4-ohm voice coil.

6.5" CONE
Pressed paper cone, Avatar dust cap in the center.
CLOTH SURROUND
Cloth roll between the cone and the steel flange.
TERMINALS
Push terminals exit under the basket.
FERRITE MOTOR
Ferrite magnet, 2.95 inches of mounting depth.
$179.90